The CP Tactical barrel can make your Tippmann look badass while increasing your accuracy and making your paintball gun quieter. The CP Tactical can give you any look that you are looking for with many muzzle breaks to choose from. These barrels are just plain cool. Below is a little guide on how to swap out the parts to give you the look you want.
Remove the tip from the paintball barrel by unscrewing it counter clockwise.
Remove the external thread protector by sliding it off the tip of the paintball barrel.
Slide the hand shroud adapter down the paintball barrel and thread it snugly to the threads that are exposed. If your paintball gun has an LPR or external milling in the way, there is a flat side on the hand shroud adapter to compensate for it.
Slide the hand shroud over the paintball barrel and thread it to the hand shroud adapter.
Align the shroud so that it lines up how you like it and lock it down with the lock ring against the shroud.
Thread the tip back on and slap the barrel on your Tippmann and you are good to go!
