Free Economy Shipping on orders over $89
Reduced shipping cost available on smaller orders.
This stock is a solid metal cnstruction. It is fixed length (not adjutable). Color is anodized black. Stock will fit any Model 98 (including ACT version). This stock has a knob adjustment for drive spring tension. This makes an alternate way to adjust the velocity of the Tippmann 98.
Carver One Installation: We've had a little trouble installing these stocks on the US Army Carver One but we found an easy fix. It seems the lip at the back of the Carver One is very slightly thicker than the lip at the back of the Tippmann 98. At least for this stock, that means the stock won't set down in to the body of the gun correctly preventing the gun body halves from pressing back together. Our fix for this was to very slightly grind down that back lip. We probably only had to take off 1/64th of an inch or so. Grind, check fit, grind check fit etc. This left a silver mark where you could see bare metal when looking at the gun from the back. We covered that up with some magic marker but the grind mark isn't visible anyways once the stock is installed.
Warranty | Returns:
Please see our standard Website Warranty and Returns Information (Link will open in a new window.)
Share your knowledge of this product with other customers... Be the first to write a review
Order Online or by
Phone: (785) 856-0647
Copyright © 2002-2015