This is the 2011 Tippmann Receiver Right - Upper Black Body Half.

If you are replacing the receiver on a previous version of the A-5, you'll be getting the new version listed above and the following are also required:

   * TA01031 Receiver Left - Upper Black
   * TA05021 Power Tube Plug
   * TA10053 Receiver O-ring
   * 02-21 Power Tube Version 3 (With elongated exhaust hole, if not already installed)
   * TA01036 Front Grip (If you want to complete the Original look.  You can use your original front grip, but the new halves do not have a front finger guard.  It is incorporated in TA01036.)

A-5 with Response Trigger:  You can upgrade to use both exhaust outlet holes on the new half, if you purchase:

   * 2 x 20-07 - Swivel Elbow Banjo 1/16
   * 02-87 - 1/16 ID Hose (3 inch Long)
   

1/8 inch Fittings are also available:

   * TA05018 1/8 ID Hose 3-1/4 inch Long
   * 20-20 Swivel Elbow Banjo Fitting 1/8
   * 02-103 RT Flow Control Valve 1/8
   * and you'll still need a 1/16 banjo for the cyclone feed, 20-07 Swivel Elbow Banjo 1/16



You can also just use the TA05021 listed above and not change anything else in the system.



The updated A-5's also includes 1/8 hose similar to the X7:

   * TA05018 1/8 ID Hose 3-1/4 inch Long
   * 20-20 Swivel Elbow Banjo Fitting 1/8
   * 02-103 RT Flow Control Valve 1/8

Warranties for all Tippmann products are handled through the manufacturer.
Tippmann Sports, LLC - Toll Free Support: 1-800-533-4831
Tippmann Gun Warranty Online Registration: http://tippmann.com/usa/cust_service/warranty/register.aspx
Mailing Address: 2955 Adams Center Road, Fort Wayne, IN, 46803, USA
Tippmann Recall Information: http://tippmann.com/usa/recall/default.aspx