Home > Hoppers and Accessories > Cyclone Feed Hoppers and Upgrades > Tippmann Cyclone Feed Upgrades >   TechT Paintball Cyclone Feed QEPH - Black [98,A5,X7]
	Best Price, Guaranteed! Click to Match Price List Price: $44.95 Our Price: $39.95 Sale Price: $34.99 You Save $9.96 Color: Black SKU: TP003 Availability: Usually ships within 3 to 6 business days. Product Code: 8098 Don't forget these paintball necessities: : Bottle Orings 10 Pack [Add $4.00] Qty:

Description Warranty and Returns Info   Housing only.  Does not include complete cyclone feed system. Here is a first look at the new Quick Exhaust Piston Housing for the Cyclone Loader. The QEPH is designed to rapidly vent the blast of air that is used to advance the loader. By venting the gas quickly, the loader responds instantly. This equates to faster loading with lower pressure. The standard A5 piston housing has no venting ports (very bad). X7 Piston housing has forward exhaust ports only (better). Meaning that it only exhausts the air that is in front of the piston....not behind it. Its the air behind the piston that is doing all the work and really needs to be vented in order for faster loading. The QEPH is a forward and reverse exhaust tube. It exhausts the air in front the piston during the piston stroke and behind the piston at the end of the piston stroke. Venting the air in front of the piston in the early part of the stroke means that less pressure is needed to advance the loader and venting the air behind the piston allows the loader to return faster. The materials used are better than that of the stock piston housings, the internal finish is much smoother and is teflon coated, they perform much better (increasing speed and efficiency), and they look way cooler. This part is designed to do what the normal QEV (Quick Exhaust Valve) attempts to do. With the QEPH there are no gaskets to keep clean, and its exhaust is exponentially faster. All the QEPHs have polished internals and are teflon coated. This makes for the smoothest action.   Features As I'm sure you noticed, there is a new piston seal that comes with the QEPH. The seal is included because we wanted to use a seal that slid smoothly in the QEPH. This seal is a bit smaller than the seals we have used on the Lightening Rods in the past, but is the same seal being used from all of the Lightening Rods that we are currently shipping. So if you already had the Lightening Rod, and are now getting the QEPH as the next step, I suggest removing the seal that's on your Lightening Rod, and replacing it with this new one. If you received the QEPH and Lightening Rod at the same time, the seal on the rod is the same as the one that came with the QEPH, so you're all set. To the install.... 1. Remove the bottom plate from your Cyclone Housing by removing the 4 screws that hold the plate in place. 2. Slide off your old housing from the piston. This should leave you with the old piston housing and thumb actuator in one hand. 3. To remove the thumb actuator from your old piston housing, pull the thumb actuator all the way back out of the housing. Now grab on to the actuator rod with a pair of pliers GENTLY. Any type of pliers will do. In the other hand, take a wrench or another pair of pliers to the flatted knob at the end of the shaft. Now carefully unscrew the knob from the shaft. It should unscrew easily. 4. Once unscrewed, apply a small dab of grease or oil to the little oring that is at the end of the shaft opposite the knob. 5. Drop the shaft down into the QEPH so that the threaded end comes through in order to re-install the knob. 6. Re-install the knob. 7. If needed put the included seal on the piston, do that now. If you are using the stock piston rod, then you can just use the one that comes on it stock as well. Apply a few drops of oil to the seal on the piston seal. 8. Drop about 5 drops of oil down into the QEPH. Now slide the piston down into the QEPH. Move it back and forth to work the oil around. Re-install the QEPH into the Cyclone Housing as normal, and put the cover back on the Cyclone. 9. GO SHOOT!!!

Related Products... TECHT Paintball Gun Sav Our Price: $9.99 Add More Products in this Category Speed Feed V3 Lid Halo Reloader Hybrid Pink Our Price: $17.45 Add RPM 1 8 Inch Hose for RT 1 1 4 Inch Long Red Our Price: $2.00 Add RPM 1 8 Inch Hose for RT 1 1 4 Inch Long Clear Our Price: $2.00 Add Lapco Cyclone Feed Premium Soft Paddles Our Price: $15.99 Add RPM 1 8 Inch Hose for RT 1 1 4 Inch Long White Our Price: $2.00 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Hoppers and Accessories > Cyclone Feed Hoppers and Upgrades > Tippmann Cyclone Feed Upgrades Hoppers and Accessories > Cyclone Feed Hoppers and Upgrades

	Bush Rag Ghillie Gun Cover - Woodland $24.95
	Nxe 4 Pod Harness with Easy Ejection and Belt - Digital Camouflage $22.99
	Save Phace So Phat Goggles - Boo $75.95
	TechT Paintball Cyclone Feed Upgrade Kit - Black [98,A5,X7] $89.99
	Tippmann X7 Phenom Upper Receiver Diagram V3
	Save Phace Dope Series Goggles - Invador [Red] $54.95
	HammerHead Barrel Fin Bore Sizer .690 Inch ID [Tippmann A5,X7] $29.00
	Allen Paintball Product Scenario Pod - 50 Round - Black $4.49
	Trinity ACOG Sharp Eye Red Dot Sight $89.95