Free Economy Shipping on orders over $89

Reduced shipping cost available on smaller orders.

Tippmann Parts
telephone number
Questions? Call us!
Mon-Fri - 9-5 CST
Security Verified
(Your shopping cart is empty)

  Home > Upgrades > US Army > Alpha Black >

  Tippmann E-Grip [Alpha Black,Project Salvo,Carver One]
E-Grip [Alpha Black,Project Salvo,Carver One]

110% Best Price Guarantee - Click for Details
Our Price: $79.95

SKU: T206002

Availability: Ships within 5 business days.

Product Reviews Product Code:

Description Warranty

Everything you need to upgrade your basic Alpha Black, Project Salvo, or Carver One to an E-grip with firing modes. To activate full-auto modes you must pull the trigger 4 single pulls within 1.00 second and hold the 4th pull to fire full-auto until you release the trigger. The gun grip has punch outs that you'll take out to access and see the electronic controls. Instructions are included.


  • Fits Alpha Black Basic and Tactical Markers.
  • 4 Firing Modes
  • Semi-Auto
  • 3 Shot Safety Burst
  • Full-Auto Normal - 12 BPS
  • Full-Auto Fast - 15 BPS

Warranty | Returns:

Tippmann Sports

  • Warranties for all Tippmann/US Army products are handled through the Tippmann Factory: Toll Free Support: 1-800-533-4831
  • Tippmann Gun Warranty Online Registration:
  • Mailing Address: 2955 Adams Center Road, Fort Wayne, IN, 46803, USA

Please see our standard Website Warranty and Returns Information (Link will open in a new window.)

Accessories for this product...
Energy Paintball Alkaline Battery - Special Forces - 2 Pack - Camouflage and White - 9 Volt
Sale Price: $5.95

Alkaline Battery - Special Forces - 2 Pack

Average Customer Review: 4 of 5 | Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
Ok March 21, 2015
Reviewer: Chaz Hamlin from Louisville, KY United States  
Took awhile to install... Kind of weird the trigger sensor wire is kind of long and it bunches up... Thought it would come in US army package like in the photo... But it works

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Works great October 28, 2014
Reviewer: Marc Mongeon from Ottawa, ON Canada  
installed into a bravo one (alpha black)

required assembly. The parts snapped together perfectly fine, the slots were keyed to prevent a backwards installation.

The problem with that is, the slots which the different components (trigger switch, battery nodes, resistor) plug into, take up valuable space. The cables running to these slots, or plugs, are longer than actually needed. When the circuit board+components, sear pin, battery are installed and you assemble the markers other half of the receiver, it makes for a VERY fit.

All you have to do is make sure that no wires are pinched, and that sear is free to "roll on the spot" or spin around within its seating. This will prove that the pin is not rubbing against any wires, sockets or soldering points.

Worked like a charm once installed properly.

Along with the additional firing mode (auto response), this particular egrip came with all usual egrip parts PLUS a brand new hammer/rear bolt.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
awesome! March 19, 2013
Reviewer: Anonymous Person from keller, TX United States  
This upgrade is exactly as advertised! Burned through 2 cases of paint with the Cyclone hopper, and only sprayed (splattered the ball in the chamber) twice. And, as expected from Tippman, even after spraying, it shot fine after a quick squeegee.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
E grip for Alpha Black June 27, 2012
Reviewer: Scott from CO United States  
It is great, but paintballs sure go fast. Way cool.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Look into the Virtue board May 27, 2012
Reviewer: Teej from LS, IA United States  
If you just want a board with average settings and you are an average paintball player who doesn't want to spend an extra 20 dollars this board is the right one for you. If you want the best US Army board on the market right now I would personally advise spending an extra 20 for the Virtue board. I would have got that and still will in the future but when I ordered this board I was unaware the Virtue would work on my Salvo. So now I'm stuck with an average board with great features including semi auto, 3 shot burst, and 2 fully auto modes. Its not a bad board I'm just saying there's a better one out there.
Most recently I took apart my salvo to add some upgrades and pinched the 9v clamp between the clam shell when reassembling it, that broke the negative lead off, luckily I had a spare 9v clamp that I soldered on. That was my own stupidity but be aware the kit is hard to get to stay in while assembling and the long wire of the 9v clamp can create problems so just pay close attention.

Was this review helpful to you?

Browse for more products in the same category as this item:

Upgrades > US Army > Alpha Black
Upgrades > US Army > Project Salvo
Upgrades > US Army > Carver One
Upgrades > Tippmann > Electronics Upgrades
Upgrades > US Army