![Oring Kit - Gold [98,A5,X7 non Phenom,FT12,Gryphon,Triumph,US Army,Cyclone Feeds]](http://paintball.tippmannparts.com/photos/products/4057-1.jpg)
|
|
![Oring Kit - OEM [98]](http://paintball.tippmannparts.com/photos/products/2982-1.jpg)
|
|
![Oring Kit - Player [98,A5,X7 non Phenom,FT12,Gryphon,Triumph,US Army,Cyclone Feeds]](http://paintball.tippmannparts.com/photos/products/4052-1.jpg)
|
|
![Zero Kick Hammer [98 ACT]](http://paintball.tippmannparts.com/photos/products/2474-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
Gold Oring Kit for Tippmann Guns
|
OEM Oring Kit for Tippmann 98
|
Player Oring Kit for Tippmann Guns
|
The Zero Kick ACT Hammer from TechT is an upgraded hammer for any Tippmann ACT gun. Because of its 58% weight reduction from the stock hammer, the Zero Kick ACT Hammer gives you much less reciprocating mass inside the gun.
|
|
|
![X7 Phenom Cyclone Feed System Kit for 98's [98 Custom Series, Alpha, Salvo]](http://paintball.tippmannparts.com/photos/products/8428-1.jpg)
|
|
|
|
![Oring Kit - Arsenal [98,A5,X7 non Phenom,FT12,Gryphon,Triumph,US Army,Cyclone Feeds]](http://paintball.tippmannparts.com/photos/products/4053-1.jpg)
|
|
![Oring Kit - O/T [98,A5,X7 non Phenom,FT12,Gryphon,Triumph,US Army,Cyclone Feeds]](http://paintball.tippmannparts.com/photos/products/4059-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
With this Tippmann Sports X7 Phenom Cyclone Feed System Kit you can install the newer, faster, cyclone feed that comes on X7 Phenom's directly onto your 98 Custom as an upgrade. Comes with everything you need for installation.
|
.
|
Arsenal Oring Kit for Tippmann Guns
|
Oil and Tools Oring Kit for Tippmann Guns
|
|
|
![Oring Kit - Service [98,A5,X7 non Phenom,FT12,Gryphon,Triumph,US Army, Cyclone Feeds]](http://paintball.tippmannparts.com/photos/products/4061-1.jpg)
|
|
![Hair Pin Trigger Kit [A5, 98 Series, X7, Alpha, Carver, Salvo]](http://paintball.tippmannparts.com/photos/products/2602-1.jpg)
|
|
![Cup Seal [98]](http://paintball.tippmannparts.com/photos/products/2958-1.jpg)
|
|
![Cyclone Feed System [98 Custom Series, Alpha Black, Project Salvo]](http://paintball.tippmannparts.com/photos/products/8304-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
Service Oring Kit for Tippmann Guns
|
The Hair Pin Trigger Kit is designed to make any electronic, manual, or responsed Tippmann trigger faster and more sensitive than ever before.
Tippmann A5, 98 or X7 Hair Pin Trigger Kit - Same kit fits all three markers
|
Never crack a cup seal again with the Black Magic cup seal by NW Paintball Products. It replaces the stock seal with a delrin more resistant to forming and a freezing point of -40F.
|
Works on 98 Custom, 98 Custom Pro, 98 Custom ACT , 98 Custom Pro ACT, 98 Custom Platinum Series, 98 Custom Pro Platinum Series, Alpha Black, and the Project Salvo.
The A-5 Cyclone Feed system is now available for your Custom Pro or 98 Custom marker.
|
|
|
![Rampage Board [98 Custom, Custom Pro, Platinum, Alpha]](http://paintball.tippmannparts.com/photos/products/5680-1.jpg)
|
|
![4 piece Mod Kit [Alpha Black]](http://paintball.tippmannparts.com/photos/products/8949-1.jpg)
|
|
![4 Spring Velocity Spring Kit [Model 98, 98 Custom, A5, X7, Alpha Black, +more]](http://paintball.tippmannparts.com/photos/products/3216-1.jpg)
|
|
![Vertical Handle / Grip / Foregrip [X7, Alpha Black, Carver One, Project Salvo, Any Picatinny Rail]](http://paintball.tippmannparts.com/photos/products/5563-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
The Rampage board for the Pro-E/98 is a direct Drop-In replacement for your existing E-Grip.
This board features:
State-of-the-art RISC Microcontroller
Weather Resistant Conformal Coating protects your electronics in the Rain!
|
The conversion kit turns your Alpha Black into a tactical style marker in seconds. It includes an M16 style six position collapsible stock and an M16 style shroud with built-in site and a tactical sling.
|
4 Spring Velocity Spring Kit [Model 98, 98 Custom, A5, X7, Alpha Black, +more]
|
The M16 Vertical Handle is made of high impact composite material. Features include an adjustable placement on the weaver rail and a genuine mil-sim look.
Requires Tac Rail for mounting if you don't have a weaver rail.
|
|
|
|
|
![Shroud - 8 Inches [Alpha Black, Alpha Black E]](http://paintball.tippmannparts.com/photos/products/6002-1.jpg)
|
|
![E-Grip [Alpha Black,Project Salvo,Carver One]](http://paintball.tippmannparts.com/photos/products/1627-1.jpg)
|
|
![Collapsible Stock Assembly [Alpha Black, Alpha Black E, Carver One, Carver One E, Project Salvo]](http://paintball.tippmannparts.com/photos/products/6028-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
Universal design accomdates just about any marker. Allows hands free control of your paintball gun. Made with Super-Strong webbed nylon strap and plastic hook connections.
|
This is the shroud that comes stock on the Alpha Black.
Also fits the Project Salvo.
|
Everything you need to upgrade your basic Alpha Black, Project Salvo, or Carver One to an E-grip with firing modes.
Fits Alpha Black Basic and Tactical Markers.
4 Firing Modes
Semi-Auto
3 Shot Safety Burst
Full-Auto Normal
Full-Auto Fast
|
Requires the slotted end cap TA06006 and bolt TA09919 to install on a 98 Custom.
|
|
|
![ACT Upgrade Kit [98 Platinum Series Ultra Basic, US Army]](http://paintball.tippmannparts.com/photos/products/5193-1.jpg)
|
|
![Folding Collapsible Stock [All 98 Series, A5, US Army]](http://paintball.tippmannparts.com/photos/products/2126-1.jpg)
|
|
![Shroud - Complete - 8 Inches [Alpha Black, Salvo]](http://paintball.tippmannparts.com/photos/products/2831-1.jpg)
|
|
![Lightweight Hammer [All non-ACT Tippmanns] Base Kit](http://paintball.tippmannparts.com/photos/products/6087-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
Fits Alpha Black Basic, Alpha Black E-Grip, Project Salvo and Carver One.
Also will work to upgrade a 98 Platinum Series NON-ACT to ACT.
Will NOT work on 98 custom or custom pro.
Includes all the parts need for a functioning ACT Bolt system.
|
Fits 98 customs and US Army Alpha Black, Project Salvo, and Carver One, and NOW A5!
The Tipppmann Folding Collapsible Stock can adjust to 7 total positions.
|
4 tactical weaver rails for mounting accessories.
This is the shroud that comes stock on the Project Salvo.
Also fits the Alpha Black.
|
The New DeSignz Lightweight Hammer is a drop in upgrade that replaces the stock non-A.C.T. Tippmann 98 and Tippmann A5 Rear Bolts. It allows for less operational kick, shorter and softer trigger pull, and easier re-cocks.
|
|
|
![Trigger Spring Kit [Tippmann Guns, BT Guns]](http://paintball.tippmannparts.com/photos/products/1536-1.jpg)
|
|
![Angled Foregrip [Alpha Black, Bravo One, Carver One, Tango One, TM15, Project Salvo, Sierra One]](http://paintball.tippmannparts.com/photos/products/1688-1.jpg)
|
|
![Magazine Fed Conversion Kit [98's, Alpha Black, Project Salvo, Bravo One, Sierra One, Carver One, Tango One, BT4's]](http://paintball.tippmannparts.com/photos/products/1715-1.jpg)
|
|
![Oring Kit - Deluxe [98,Alpha,Carver,Gryphon,Salvo,Triumph]](http://paintball.tippmannparts.com/photos/products/4702-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
TechT Trigger Springs adjust your trigger to your specifications!
|
works on most paintball guns
|
Includes 20 round magazine. Will accept other magazine sizes including the 250 round box magazine.
|
Deluxe Oring Kit for Tippmann 98,Alpha,Carver,Salvo,Triumph
|
|
|
![Offset Clamp Style Feed Neck [Alpha Black, Project Salvo]](http://paintball.tippmannparts.com/photos/products/737-1.jpg)
|
|
![Wicked Bolt [Alpha,Carver,Salvo]](http://paintball.tippmannparts.com/photos/products/775-1.jpg)
|
|
![Stainless Steel Screw Kit with Clear Elbow [98 Series, Alpha, Salvo]](http://paintball.tippmannparts.com/photos/products/1635-1.jpg)
|
|
![Foldable Vertical Handle [X7]](http://paintball.tippmannparts.com/photos/products/722-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
The US Army Project Salvo Offset Clamp Style Feed Neck allows you to quickly remove and install your hopper without using any tools.
|
Increase the performance, accuracy and efficiency with the Rufus Dawg Wicked Bolt system.
The 'WICKED BOLT' kit includes 1 new Bolt with O-Ring and 1 new powertube that fits the Tippmann ALPHA SERIES Markers.
|
Customize your 98 with a complete STAINLESS STEEL kit. Includes all the screws and nuts made from surgical grade STAINLESS STEEL. Also includes a Laser cut, STAINLESS Elbow Mount and Front Sight.
This also includes an APP clear hopper elbow.
|
Tippmann Foldable Vertical Handle [X7]
|
|
|
|
|
![Parts Upgrade to Egrip Kit [Alpha Black, Project Salvo]](http://paintball.tippmannparts.com/photos/products/3453-1.jpg)
|
|
|
|
![Barrel Weaver Rail - Single - Metal [M4/M16 Shrouds]](http://paintball.tippmannparts.com/photos/products/244-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
TA06207 US Army Magazine [Salvo]
|
For upgrading a standard trigger to an electronic. Everything you need to assemble an e-grip. You just provide the aftermarket board.
*Some aftermarket board installations may require modifications to the marker.
|
A quality grip for your qualitty Tippmann marker!
|
Barrel Weaver Rail - Single - Metal [M4/M16 Shrouds]
|
|
|
![Elbow Clamp Upgrade Kit [98 Series, Alpha, Salvo, Carver, BT's]](http://paintball.tippmannparts.com/photos/products/7217-1.jpg)
|
|
![Zero Kick Hammer SE with Striker Extension [X7, A5,98's, US Army Guns, BT4, Milsig, Gryphon, and MORE]](http://paintball.tippmannparts.com/photos/products/3181-1.jpg)
|
|
![Aluminum Cocking Knob - Black [All 98's,Alpha Blacks,Salvos]](http://paintball.tippmannparts.com/photos/products/1115-1.jpg)
|
|
![RIS Vertical Handle / Grip / Foregrip [X7, Alpha Black, Carveron One, Project Salvo, Any Picatinny Rail]](http://paintball.tippmannparts.com/photos/products/75-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
BT Elbow Clamp Upgrade Kit [98's, BT's]
|
TechT Paintball Zero Kick Hammer SE with Striker Extension
|
Add a little accent to your 98 Custom while making it easier on your fingers to cock it with this cocking knob from Lapco Paintball.
|
Increase your accuracy and get a solid feel with this Real Action Paintball RIS Vertical Handle. Mounts to weaver or picatinny rails.
|
|
|
