Free Economy Shipping on orders over $89

Reduced shipping cost available on smaller orders

Tippmann Parts
telephone number
Questions? Call us!
Mon-Fri - 9-5 CST
Security Verified
(Your shopping cart is empty)
Knowledge Base:  
You are here: Knowledge Base > Tech Support and FAQ by Gun > Tippmann 98

Page of 1

Are Tippmann Paintball Guns easy to maintain? [98, A5, Crossover, Gryphon, TiPX, X7, Phenom, Alpha Black, Carver One, Project Salvo]


Paintball guns are basically pneumatic tools.  Keeping them clean and lubricated are the most important things. Replacing the internals seals at least 1 time per year (2-3 times if you are a more

Cocking / Cycling Issues [98, A5, Gryphon, X7, Alpha Black, Carver One, Project Salvo]


Having shooting problems?   Is your gun stuttering or not re-cocking? This is caused by excess drag on the internals of the gun, or seals leaking and not providing enough pressure to re

Converting E-grips to Mechanical [98, A5, X7, Alpha Black, Carver One, Project Salvo]


You will need these parts when converting an E-Grip to a Mechanical Semi-Auto For 98 Customs (with Push Sear, and Platinum Series) and US Army (Alpha Black, Project Salvo, Carver One): 2493 - Complet

Cyclone Feed Troubleshooting [98, A5, X7, Phenom, Alpha Black, Project Salvo]


Cyclone troubles?  Try these helpful tips Always keep the cyclone clean.  Broken paint and shell will get on the Feeder Housing , Sprocket Paddles , Feeder Axle ,

E-Grip Trigger Board Problem [98, A5, Crossover, X7, Phenom, Alpha Black, Carver One, Project Salvo]


If you have a problem with an E-Grip Trigger, these steps may help to solve your issue: Before doing and trouble shooting of any kind, make sure your marker is degassed and follow your manual for di

Feed elbow, cyclone feed, or front sight attachment problems [98, Alpha Black, Project Salvo]


On the 98 Custom series , Alpha Blacks , and Project Salvos , the feed elbow or cyclone feed housing attaches to the body with 2 pins on the bottom, and then locks into place by latching on the front

Installing a Bottom Line [98 Custom Pro]


Take the Drop Forward off a 98 Custom Pro and get a new bottom line adapter .  http://www.tippmannparts.com/TA02061-98-Custom-Platinum-ACT-Pro-Straight-Gas-L-p/gp3853.htm

Installing a Shoulder Stock - Tippmann and US Army [98, A5, X7, Phenom, Alpha Black, Carver One, Project Salvo]


To assemble a stock on a 98 series gun , please follow the disassembly procedures in your gun manual . You will need to remove the End Cap and insert the stock into the slots where the End Cap was. Yo

Response Trigger Troubleshooting [98, A5, X7, Alpha Black Elite, Project Salvo]


Response Trigger isn't getting a burst rate of fire To Tune the RT System Follow the air cylinder installation and velocity screw adjustment instructions in the Getting

Upgrading and Installing an Electronic Grip [Tippmann 98 Series

]

This is the current 98 E-Grip offering from Tippmann. http://www.tippmannparts.com/Tippmann-E-Grip-Custom-Pro-p/688.htm It will work on any of the Tippmann Custom Pro's, Platinums, and any 98 Custom
Tippmann 98 Response Kit and Cyclone Upgrades
Question: From: peter Time:12/05/2011 09:35:14 I just brought a trippmann 98 custom today. I want to upgrade the shooting speed of the gun. Do I just need to buy the cyclone feeder and the response t