Free Economy Shipping on orders over $89

Reduced shipping cost available on smaller orders

Tippmann Parts
telephone number
Questions? Call us!
Mon-Fri - 9-5 CST
Security Verified
(Your shopping cart is empty)
Knowledge Base:  
You are here: Knowledge Base > Tech Support and FAQ by Gun > US Army Alpha Black / Bravo One.

Page of 1

Are Tippmann Paintball Guns easy to maintain? [98, A5, Crossover, Gryphon, TiPX, X7, Phenom, Alpha Black, Carver One, Project Salvo]


Paintball guns are basically pneumatic tools.  Keeping them clean and lubricated are the most important things. Replacing the internals seals at least 1 time per year (2-3 times if you are a more

Barrels for the U.S Army Guns [Alpha Black, Bravo One, Carver One, Tango One, Project Salvo, Sierra One]


The US Army line of guns, including the Alpha Black / Bravo One , Project Salvo / Sierra One , and the Carver One / Tango One use Tippmann 98 Thread Barrels available HERE. To fit in the shrouds, the

Cocking / Cycling Issues [98, A5, Gryphon, X7, Alpha Black, Carver One, Project Salvo]


Having shooting problems?   Is your gun stuttering or not re-cocking? This is caused by excess drag on the internals of the gun, or seals leaking and not providing enough pressure to re

Converting E-grips to Mechanical [98, A5, X7, Alpha Black, Carver One, Project Salvo]


You will need these parts when converting an E-Grip to a Mechanical Semi-Auto For 98 Customs (with Push Sear, and Platinum Series) and US Army (Alpha Black, Project Salvo, Carver One): 2493 - Complet

Cyclone Feed Troubleshooting [98, A5, X7, Phenom, Alpha Black, Project Salvo]


Cyclone troubles?  Try these helpful tips Always keep the cyclone clean.  Broken paint and shell will get on the Feeder Housing , Sprocket Paddles , Feeder Axle ,

E-Grip Trigger Board Problem [98, A5, Crossover, X7, Phenom, Alpha Black, Carver One, Project Salvo]


If you have a problem with an E-Grip Trigger, these steps may help to solve your issue: Before doing and trouble shooting of any kind, make sure your marker is degassed and follow your manual for di

Feed elbow, cyclone feed, or front sight attachment problems [98, Alpha Black, Project Salvo]


On the 98 Custom series , Alpha Blacks , and Project Salvos , the feed elbow or cyclone feed housing attaches to the body with 2 pins on the bottom, and then locks into place by latching on the front

Installing a Shoulder Stock - Tippmann and US Army [98, A5, X7, Phenom, Alpha Black, Carver One, Project Salvo]


To assemble a stock on a 98 series gun , please follow the disassembly procedures in your gun manual . You will need to remove the End Cap and insert the stock into the slots where the End Cap was. Yo

Rail Accessory Mounting (Sights) [Alpha Black, Bravo One]


To put a sight, scope, fore-grip or a tactical carry handle on an Alpha Black or Bravo One , you need to add weaver / picatinny accessory rails. You can add rails to the carry handle or barrel shro

Whats the difference between the Alpha Black and the Bravo One?


The only differences are the name badges and decals. The Alpha Black is the US version. The Bravo One is only sold outside the US.