Are Tippmann Paintball Guns easy to maintain? Paintball guns are basically pneumatic tools. Keeping them clean and lubricated are the most important things. Replacing the internals seals at least 1 time per year (2-3 times if you are a more
Cocking / Cycling Issues Having shooting problems?
Is your gun stuttering or not re-cocking?
This is caused by excess drag on the internals of the gun, or seals leaking and not providing enough pressure to re
Cyclone Feed Troubleshooting
Cyclone troubles? Try these helpful tips
Always keep the cyclone clean. Broken paint and shell will get on the Feeder Housing , Sprocket Paddles , Feeder Axle ,
E-Grip Trigger Board Problem If you have a problem with an E-Grip Trigger, these steps may help to solve your issue:
Before doing and trouble shooting of any kind, make sure your marker is degassed and follow your manual for di
Response Trigger isn't getting a burst rate of fire.
Response Trigger isn't getting a burst rate of fire
To Tune the RT System
Follow the air cylinder installation and velocity screw adjustment instructions in the Getting
Shoulder Stock Installation on Tippmann and US Army Paintball Guns To assemble a stock on a 98 series gun , please follow the disassembly procedures in your gun manual . You will need to remove the End Cap and insert the stock into the slots where the End Cap was. Yo
What barrels fit the U.S Army Guns? The US Army line of guns, including the Alpha Black / Bravo One, Project Salvo / Sierra One, and the Carver One / Tango One use Tippmann 98 Thread Barrels available HERE. To fit in the shrouds, the ba
