Installing a Shoulder Stock - Tippmann and US Army [98, A5, X7, Phenom, Alpha Black, Carver One, Project Salvo]
To assemble a stock on a 98 series gun , please follow the disassembly procedures in your gun manual . You will need to remove the End Cap and insert the stock into the slots where the End Cap was. Yo |
E-Grip Trigger Board Problem [98, A5, Crossover, X7, Phenom, Alpha Black, Carver One, Project Salvo]
If you have a problem with an E-Grip Trigger, these steps may help to solve your issue:
Before doing and trouble shooting of any kind, make sure your marker is degassed and follow your manual for di |
Cyclone Feed Troubleshooting [98, A5, X7, Phenom, Alpha Black, Project Salvo]
Cyclone troubles? Try these helpful tips
Always keep the cyclone clean. Broken paint and shell will get on the Feeder Housing , Sprocket Paddles , Feeder Axle , |
Upgrading and Installing an Electronic Grip [Tippmann 98 Series]
This is the current 98 E-Grip offering from Tippmann.
http://www.tippmannparts.com/Tippmann-E-Grip-Custom-Pro-p/688.htm
It will work on any of the Tippmann Custom Pro's, Platinums, and any 98 Custom |
Feed elbow, cyclone feed, or front sight attachment problems [98, Alpha Black, Project Salvo]
On the 98 Custom series , Alpha Blacks , and Project Salvos , the feed elbow or cyclone feed housing attaches to the body with 2 pins on the bottom, and then locks into place by latching on the front |
Cocking / Cycling Issues [98, A5, Gryphon, X7, Alpha Black, Carver One, Project Salvo]
Having shooting problems?
Is your gun stuttering or not re-cocking?
This is caused by excess drag on the internals of the gun, or seals leaking and not providing enough pressure to re |
Installing a Bottom Line [98 Custom Pro]
Take the Drop Forward off a 98 Custom Pro and get a new bottom line adapter .
http://www.tippmannparts.com/TA02061-98-Custom-Platinum-ACT-Pro-Straight-Gas-L-p/gp3853.htm |
Converting E-grips to Mechanical [98, A5, X7, Alpha Black, Carver One, Project Salvo]
You will need these parts when converting an E-Grip to a Mechanical Semi-Auto For 98 Customs (with Push Sear, and Platinum Series) and US Army (Alpha Black, Project Salvo, Carver One): 2493 - Complet |
Are Tippmann Paintball Guns easy to maintain? [98, A5, Crossover, Gryphon, TiPX, X7, Phenom, Alpha Black, Carver One, Project Salvo]
Paintball guns are basically pneumatic tools. Keeping them clean and lubricated are the most important things. Replacing the internals seals at least 1 time per year (2-3 times if you are a more |
Response Trigger Troubleshooting [98, A5, X7, Alpha Black Elite, Project Salvo]
Response Trigger isn't getting a burst rate of fire
To Tune the RT System
Follow the air cylinder installation and velocity screw adjustment instructions in the Getting |
Upgrade your A5 RT Hoses from 1/16" to 1/8" [A5]
Easy to do. You need this 1/8" hose Response Trigger fitting kit . http://www.tippmannparts.com/Tippmann-Adapter-Cyclone-Feed-Response-Kit-98-p/2759.htm and 1 extra hose for the A5. http://www.t |
How do I attach the Tippmann Connex remote to my TPX Pistol?
To attach the new Tippmann Connex Remote Line to a TPX Pistol , you will need to swap the male quick disconnect fittings.
If installed, remove the TPX Remote Line Adapter tube from the TPX P |
Barrels for the U.S Army Guns [Alpha Black, Bravo One, Carver One, Tango One, Project Salvo, Sierra One]
The US Army line of guns, including the Alpha Black / Bravo One , Project Salvo / Sierra One , and the Carver One / Tango One use Tippmann 98 Thread Barrels available HERE. To fit in the shrouds, the |
|
