Free Economy Shipping on orders over $89

Reduced shipping cost available on smaller orders

Tippmann Parts
Questions? Call us!
Mon-Fri - 9-5 CST
Security Verified
(Your shopping cart is empty)
Knowledge Base:  

You are here: Knowledge Base : A-5
Page of 1

Installing a Shoulder Stock - Tippmann and US Army [98, A5, X7, Phenom, Alpha Black, Carver One, Project Salvo]


To assemble a stock on a 98 series gun , please follow the disassembly procedures in your gun manual . You will need to remove the End Cap and insert the stock into the slots where the End Cap was. Yo

Barrels for the Tippmann Gryphon


The Tippmann Gryphon will accept A5 threaded barrels . The stock Gryphon barrel has a few more threads on it than the standard A-5 , but they still screw in and fit the breech . The A-5 Flatline bar

Upgrade your A5 RT Hoses from 1/16" to 1/8" [A5]


Easy to do.  You need this 1/8" hose Response Trigger fitting kit . http://www.tippmannparts.com/Tippmann-Adapter-Cyclone-Feed-Response-Kit-98-p/2759.htm and 1 extra hose for the A5. http://www.t

Response Trigger Troubleshooting [98, A5, X7, Alpha Black Elite, Project Salvo]


Response Trigger isn't getting a burst rate of fire To Tune the RT System Follow the air cylinder installation and velocity screw adjustment instructions in the Getting

Tippmann Stock A5 and X7 Valve Updates


The Tippmann A5's and X7's (not the Phenoms ) use almost the identical internal valve. In fact, when the X7 first came out it used the same valve as the A5. The original valve assembly used in A-5's