Free Economy Shipping on orders over $89

Reduced shipping cost available on smaller orders

Tippmann Parts
Questions? Call us!
Mon-Fri - 9-5 CST
Security Verified
(Your shopping cart is empty)
Knowledge Base:  

You are here: Knowledge Base : A5
Page of 1

Upgrading to an E Grip and an aftermarket Board [X7, X7 Phenom, A5 (2011)]


I have an X7, X7 Phenom, or an A5 (2011) with a manual trigger, and an electronics board. What other parts do i need to make a complete grip? Unfortunately there are a few parts needed that are no

Installing a Shoulder Stock - Tippmann and US Army [98, A5, X7, Phenom, Alpha Black, Carver One, Project Salvo]


To assemble a stock on a 98 series gun , please follow the disassembly procedures in your gun manual . You will need to remove the End Cap and insert the stock into the slots where the End Cap was. Yo

E-Grip Trigger Board Problem [98, A5, Crossover, X7, Phenom, Alpha Black, Carver One, Project Salvo]


If you have a problem with an E-Grip Trigger, these steps may help to solve your issue: Before doing and trouble shooting of any kind, make sure your marker is degassed and follow your manual for di

Upgrade your A5 RT Hoses from 1/16" to 1/8" [A5]


Easy to do.  You need this 1/8" hose Response Trigger fitting kit . http://www.tippmannparts.com/Tippmann-Adapter-Cyclone-Feed-Response-Kit-98-p/2759.htm and 1 extra hose for the A5. http://www.t

Converting E-grips to Mechanical [98, A5, X7, Alpha Black, Carver One, Project Salvo]


You will need these parts when converting an E-Grip to a Mechanical Semi-Auto For 98 Customs (with Push Sear, and Platinum Series) and US Army (Alpha Black, Project Salvo, Carver One): 2493 - Complet

Tippmann Stock A5 and X7 Valve Updates


The Tippmann A5's and X7's (not the Phenoms ) use almost the identical internal valve. In fact, when the X7 first came out it used the same valve as the A5. The original valve assembly used in A-5's

Are Tippmann Paintball Guns easy to maintain? [98, A5, Crossover, Gryphon, TiPX, X7, Phenom, Alpha Black, Carver One, Project Salvo]


Paintball guns are basically pneumatic tools.  Keeping them clean and lubricated are the most important things. Replacing the internals seals at least 1 time per year (2-3 times if you are a more

Cyclone Feed Troubleshooting [98, A5, X7, Phenom, Alpha Black, Project Salvo]


Cyclone troubles?  Try these helpful tips Always keep the cyclone clean.  Broken paint and shell will get on the Feeder Housing , Sprocket Paddles , Feeder Axle ,

Cocking / Cycling Issues [98, A5, Gryphon, X7, Alpha Black, Carver One, Project Salvo]


Having shooting problems?   Is your gun stuttering or not re-cocking? This is caused by excess drag on the internals of the gun, or seals leaking and not providing enough pressure to re

Response Trigger Troubleshooting [98, A5, X7, Alpha Black Elite, Project Salvo]


Response Trigger isn't getting a burst rate of fire To Tune the RT System Follow the air cylinder installation and velocity screw adjustment instructions in the Getting

Barrels for the Tippmann Gryphon


The Tippmann Gryphon will accept A5 threaded barrels . The stock Gryphon barrel has a few more threads on it than the standard A-5 , but they still screw in and fit the breech . The A-5 Flatline bar