E-Grip Trigger Board Problem If you have a problem with an E-Grip Trigger, these steps may help to solve your issue:
Before doing and trouble shooting of any kind, make sure your marker is degassed and follow your manual for di
X7, X7 Phenom, or A5 (2011), and an electronics board I have an X7, X7 Phenom, or an A5 (2011) with a manual trigger, and an electronics board. What other parts do i need to make a complete grip?
Unfortunately there are a few parts needed that are no
Converting E-grips to Mechanical You will need these parts when converting an E-Grip to a Mechanical Semi-Auto For 98 Customs (with Push Sear, and Platinum Series) and US Army (Alpha Black, Project Salvo, Carver One): 2493 - Complet
Alpha Black / Bravo One Rail Accessory Mounting (Sights) To put a sight, scope, fore-grip or a tactical carry handle on an Alpha Black or Bravo One , you need to add weaver / picatinny accessory rails.
You can add rails to the carry handle or barrel shro
Put an Electronic Grip on a Tippmann 98 This is the current 98 E-Grip offering from Tippmann.
http://www.tippmannparts.com/Tippmann-E-Grip-Custom-Pro-p/688.htm
It will work on any of the Tippmann Custom Pro's, Platinums, and any 98 Custom
X7 Phenom Leak To troubleshoot an X7 Phenom air leak, first determine the location of the leak. If the leak is from the Tank /
Tank Adapter ASA : This leak comes from a cut or nicked 18-PA Tank Valve Oring .
