X7, X7 Phenom, or A5 (2011), and an electronics board I have an X7, X7 Phenom, or an A5 (2011) with a manual trigger, and an electronics board. What other parts do i need to make a complete grip?
Unfortunately there are a few parts needed that are no
X7 Phenom Leak To troubleshoot an X7 Phenom air leak, first determine the location of the leak. If the leak is from the Tank /
Tank Adapter ASA : This leak comes from a cut or nicked 18-PA Tank Valve Oring .
Shoulder Stock Installation on Tippmann and US Army Paintball Guns To assemble a stock on a 98 series gun , please follow the disassembly procedures in your gun manual . You will need to remove the End Cap and insert the stock into the slots where the End Cap was. Yo
Converting E-grips to Mechanical You will need these parts when converting an E-Grip to a Mechanical Semi-Auto For 98 Customs (with Push Sear, and Platinum Series) and US Army (Alpha Black, Project Salvo, Carver One): 2493 - Complet
Response Trigger isn't getting a burst rate of fire.
Response Trigger isn't getting a burst rate of fire
To Tune the RT System
Follow the air cylinder installation and velocity screw adjustment instructions in the Getting
