Tippmann A-5 2011 Response Trigger Parts

02-V Tippmann Complete Valve Assembly for A5 and X7 (See notes below) included:

• 02-25 Valve Body
  • 1 & 15/16" Long
• 02-72 Valve Oring Large / Tombstone Seal
• 98-PL Cup Seal & Stem Complete
• 02-71 Valve Spring Washer
• PA-32 Valve Spring
• CA-27 Front Valve Seat
• SL2-25 Valve Seat Oring
• 98-12A Rear Bolt / Valve Body Oring

Compatibility and Tech Notes:

• This was the original complete valve assembly for the A5's and X7's but it has now been discontinued and replaced.
  • On the A5's, the 02-V valve was used on all A5's including the 2011 remodel up to serial number 602597.
• If you have an A5 and are looking for a complete valve assembly then the exact item you need is the 02-V v2 Complete Valve Assembly which has a longer valve body and a thicker tombstone oring. 
• If you have an X7 and are looking for a complete valve assembly then you need the new upgraded X7 complete valve which is TA10060.

Note: If you order the 02-V Complete Valve Assembly we will send you the newer 02-V v2 assembly.

TA01058 Large Valve Oring / Tombstone Seal

• This is the current tombstone oring for the X7 Valves # TA10060 and the A5 Valves 02-V v2.  This is a slightly larger oring than the one used in the original A5 and X7 valves 02-V which had a shorter valve body.
• Works with A5's after sn 602597. These include an updated valve body 02-25 v2 (longer) that requires a larger oring.
• Not sure which valve you have?  The orginal valve is 02-V and it had a valve body 02-25 that measured 1 & 15/16" long.  For that, you would need the 02-72 oring.
• If you have the 02-V v2 or TA10060 valves then those have the longer 02-25 v2 valve body and require the larger TA01058 oring shown here.

 If have installed a new valve body on your A5 or X7, or your gun is new since April 2013, then you would need the new style Valve Oring Large TA01058.

02-V v2 Tippmann Complete Valve Assembly for all versions of the A5 and X7 (See notes below)

Includes:

• 02-25 v2 Valve Body - 2"
  • longer than the old 02-25 body by 1/16"
• TA01058 Valve Oring Large / Tombstone Seal
  • Thicker oring for the longer valve body.
• 98-PL Cup Seal & Stem Complete
• 02-71 Valve Spring Washer
• PA-32 Valve Spring
• CA-27 Front Valve Seat
• SL2-25 Valve Seat Oring
• 98-12A Rear Bolt / Valve Body Oring

Compatibility and Tech Notes:

• This longer valve assembly was an upgrade from the 02-V and was used in all A5's and X7's.  If you have an A5, this is still the current and correct valve.