|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A simple and easy way to customize your Tippmann & US Army paintball markers.
|
A simple and easy way to customize your Tippmann & US Army paintball markers.
|
See the inside of your cyclone feed system during use.
|
A must have for iFit users with shrouded markers.
|
|
|
![iFit Barrel Adapter [TPX]](https://paintball.tippmannparts.com/photos/products/11482-1.jpg "iFit Barrel Adapter [TPX]")
|
|
![iFit Adapter and Barrel 6 Piece [TPX]](https://paintball.tippmannparts.com/photos/products/11484-1.jpg "iFit Adapter and Barrel 6 Piece [TPX]")
|
|
![iFit Adapter, Barrel, and Tip [TPX]](https://paintball.tippmannparts.com/photos/products/11486-1.jpg "iFit Adapter, Barrel, and Tip [TPX]")
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.
|
Complete six insert iFit kit for TPX.
|
Includes iFit adapter, barrel, and Veritas tip.
|
.
|
|
|
|
|
![iFit Barrel Adapter [A5 to Cocker]](https://paintball.tippmannparts.com/photos/products/11359-1.jpg "iFit Barrel Adapter [A5 to Cocker]")
|
|
|
|
![Gauge Pin - Stainless Steel [X7 Phenom]](https://paintball.tippmannparts.com/photos/products/10070-1.jpg "Gauge Pin - Stainless Steel [X7 Phenom]")
|
|
|
|
|
|
|
|
|
|
|
|
Larger hose diameter, with stainless steel fittings.
|
Put a Cocker threaded barrel on your A5 threaded marker.
|
Add a sling to your marker.
|
.
|
|
|
![Gauge Pin - Stainless Steel [X7 Phenom]](https://paintball.tippmannparts.com/photos/products/10071-1.jpg "Gauge Pin - Stainless Steel [X7 Phenom]")
|
|
|
|
|
|
![MRT H.E. Bolt [Crossover]](https://paintball.tippmannparts.com/photos/products/4299-1.jpg "MRT H.E. Bolt [Crossover]")
|
|
|
|
|
|
|
|
|
|
|
|
.
|
Translucent smoke Cyclone housing so you can see paint levels or paint breaks.
|
View the inner workings of your cyclone feed system.
|
This new Crossover bolt from TechT will maximize the performance of your marker with just a quick drop-in installation.
|
|
|
![Squishy Paddles - Original Design [Cyclone Feed Hoppers]](https://paintball.tippmannparts.com/photos/products/4207-1.jpg "Squishy Paddles - Original Design [Cyclone Feed Hoppers]")
|
|
![Trigger Spring Kit [Tippmann Guns, BT Guns]](https://paintball.tippmannparts.com/photos/products/1536-1.jpg "Trigger Spring Kit [Tippmann Guns, BT Guns]")
|
|
![Valve Retaining Ring - Snap Ring [68 Carbine, 98's, Alpha Blacks]](https://paintball.tippmannparts.com/photos/products/1534-1.jpg "Valve Retaining Ring - Snap Ring [68 Carbine, 98's, Alpha Blacks]")
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Squishy paddles are easier on paint. A must have upgrade.
|
TechT Trigger Springs adjust your trigger to your specifications!
|
A much better snap ring for servicing your valve.
|
.
|
|
|
|
|
![Gun Tag - 'Commando' [98, Salvo]](https://paintball.tippmannparts.com/photos/products/3982-1.jpg "Gun Tag - 'Commando' [98, Salvo]")
|
|
![Skull Body Pin Decal Set (6) [A5,X7,Phenom]](https://paintball.tippmannparts.com/photos/products/3785-1.jpg "Skull Body Pin Decal Set (6) [A5,X7,Phenom]")
|
|
![Zero Kick Hammer SE with Striker Extension [X7, A5,98's, US Army Guns, BT4, Milsig, Gryphon]](https://paintball.tippmannparts.com/photos/products/3181-1.jpg "Zero Kick Hammer SE with Striker Extension [X7, A5,98's, US Army Guns, BT4, Milsig, Gryphon]")
|
|
|
|
|
|
|
|
|
|
|
|
Extra stiff spring for maximum velocity.
|
.
|
.
|
TechT Paintball Zero Kick Hammer SE with Striker Extension
|
|
|
|
|
|
|
![Gun Tag - 'Recon' [A5 or X7]](https://paintball.tippmannparts.com/photos/products/9826-1.jpg "Gun Tag - 'Recon' [A5 or X7]")
|
|
![Gun Tag - 'Whiskey Tango Foxtrot' [A5 or X7]](https://paintball.tippmannparts.com/photos/products/9828-1.jpg "Gun Tag - 'Whiskey Tango Foxtrot' [A5 or X7]")
|
|
|
|
|
|
|
|
|
|
|
|
Replace your valve spring and add some velocity to your shots.
|
Replace your valve spring and add some velocity to your shots.
|
Best bling for the buck. Customize your Tippmann A5 or X7 with a new logo.
|
Best bling for the buck. Customize your Tippmann A5 or X7 with a new logo.
|
|
|
![Stainless Steel Valve Pin [Phenom]](https://paintball.tippmannparts.com/photos/products/9806-1.jpg "Stainless Steel Valve Pin [Phenom]")
|
|
![Stainless Steel Quick-Strip Pin Set [A5,X7,Phenom]](https://paintball.tippmannparts.com/photos/products/9807-1.jpg "Stainless Steel Quick-Strip Pin Set [A5,X7,Phenom]")
|
|
![Stainless Steel Valve Pin and Pull Pin Combo Set [Phenom]](https://paintball.tippmannparts.com/photos/products/9808-1.jpg "Stainless Steel Valve Pin and Pull Pin Combo Set [Phenom]")
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.
|
Maintenance your marker even with gloves on with the quick-strip kit!
|
Make your valve more durable and make field maintenance even easier!
|
.
|
|
|
![MRT Hi Performance Spring Kit [TPX, Axe, Mini, Tm7, TM15]](https://paintball.tippmannparts.com/photos/products/9809-1.jpg "MRT Hi Performance Spring Kit [TPX, Axe, Mini, Tm7, TM15]")
|
|
![MRT Pro Series Bolt [TPX]](https://paintball.tippmannparts.com/photos/products/9669-1.jpg "MRT Pro Series Bolt [TPX]")
|
|
![Fang Trigger with Guard and Spring [Phenom]](https://paintball.tippmannparts.com/photos/products/9596-1.jpg "Fang Trigger with Guard and Spring [Phenom]")
|
|
![MRT Delrin HE Pro Series Phenom Bolt with Phaze 5 Fitting Included [Phenom]](https://paintball.tippmannparts.com/photos/products/9594-1.jpg "MRT Delrin HE Pro Series Phenom Bolt with Phaze 5 Fitting Included [Phenom]")
|
|
|
|
|
|
|
|
|
|
|
|
Upgrade the TiPX dwell and operating pressure with an easy spring drop-in.
|
Reduce ball breaks, with this soft tipped MRT bolt.
|
.
|
The TechT MRT Bolt increases the performance of almost every facet of your Phenom Marker
|
|
|
|
|
|
|
|
|
![MRT Phenom Bolt [X7 Phenom]](https://paintball.tippmannparts.com/photos/products/3470-1.jpg "MRT Phenom Bolt [X7 Phenom]")
|
|
|
|
|
|
|
|
|
|
|
|
Clearance Item: All sales are final.
|
Clearance Item: All sales are final.
|
By increasing the amount of air traveling to the Cyclone Feed System, the feed paddle is activated more consistently to enable a higher feed rate even when your marker is low on air.
|
Incorporating Mass Reduction Technology, this bolt significantly improves efficiency and consistency while eliminating ball breakage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.688 red colored insert for any iFit Kit back
|
.670 violet colored insert for any iFit Kit back
|
.673 olive drab colored insert for any iFit Kit back
|
.679 gold colored insert for any iFit Kit back
|
|
|
|
|
|
|
|
|
![iFit Barrel Adapter [Cocker to A-5]](https://paintball.tippmannparts.com/photos/products/2148-1.jpg "iFit Barrel Adapter [Cocker to A-5]")
|
|
|
|
|
|
|
|
|
|
|
|
.682 green colored insert for any iFit Kit back
|
.685 blue colored insert for any iFit Kit back
|
.692 gray colored insert for any iFit Kit back
|
Put an A5 threaded barrel on your Cocker threaded marker.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.667 bronze colored insert for any iFit Kit back
|
Use the iFit system on your Ion.
|
Use the iFit system on your A5, X7, or Phenom.
|
Use the iFit system on your Autcocker threaded marker.
|
|
|
|
|
|
|
|
|
![Fang Trigger [X7, A5HE]](https://paintball.tippmannparts.com/photos/products/5412-1.jpg "Fang Trigger [X7, A5HE]")
|
|
|
|
|
|
|
|
|
|
|
|
Use the iFit system on your 98 threaded marker.
|
Six bore sizes (.685. .682, .679, .676, .673, .670).
Paint-to-barrel match in paintball has always been one of the most important things you can do to increase your guns accuracy and efficiency.
|
Add massive upgrades to your cyclone feed and rear bolt.
|
Fang trigger for HE grips.
|
|
|
![Fang Trigger [A5, A5RT, A5E]](https://paintball.tippmannparts.com/photos/products/919-1.jpg "Fang Trigger [A5, A5RT, A5E]")
|
|
|
|
![Cyclone Feed Squishy Paddles [98,A5,X7]](https://paintball.tippmannparts.com/photos/products/7488-1.jpg "Cyclone Feed Squishy Paddles [98,A5,X7]")
|
|
![Hair Pin Trigger Kit [A5, 98 Series, X7, Alpha, Carver, Salvo]](https://paintball.tippmannparts.com/photos/products/2602-1.jpg "Hair Pin Trigger Kit [A5, 98 Series, X7, Alpha, Carver, Salvo]")
|
|
|
|
|
|
|
|
|
|
|
|
Slick upgraded double trigger.
|
Gun Drops Premium Lubricant is formulated to provide maximum protection and performance for your markers internal moving parts.
Designed to be 'super slick' like our TechT Gun Sav Grease, Gun Drops Oil is specifically formulated for paintball players.
|
Eliminate cyclone feed breaks with softer paddles.
|
Make your trigger faster and more sensitive.
|
|
|
|
|
![Cyclone Feed QEPH [98,A5,X7]](https://paintball.tippmannparts.com/photos/products/8098-1.jpg "Cyclone Feed QEPH [98,A5,X7]")
|
|
![Cyclone Feed Lightening Rod [98,A5,X7]](https://paintball.tippmannparts.com/photos/products/6493-1.jpg "Cyclone Feed Lightening Rod [98,A5,X7]")
|
|
![Fang Trigger - Black [98 Custom, Custom Pro, Platinum]](https://paintball.tippmannparts.com/photos/products/6494-1.jpg "Fang Trigger - Black [98 Custom, Custom Pro, Platinum]")
|
|
|
|
|
|
|
|
|
|
|
|
Super slick lubrication.
|
Improve the speed and efficiency of your Cyclone Feed System for a faster rate of fire.
|
Increase the performance of your cyclone feed.
|
Aluminum double trigger upgrade.
|
|
|
![Cyclone Feed Vortex Mod SS [98,A5,X7]](https://paintball.tippmannparts.com/photos/products/5076-1.jpg "Cyclone Feed Vortex Mod SS [98,A5,X7]")
|
|
![Cyclone Feed Upgrade Kit - Black [98,A5,X7]](https://paintball.tippmannparts.com/photos/products/5126-1.jpg "Cyclone Feed Upgrade Kit - Black [98,A5,X7]")
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Upgraded stainless steel axle. Lifetime warranty.
|
Save some money and bundle these upgrades.
|
Give your cyclone feed a maximum upgrade.
|
Paint-to-barrel match in paintball has always been one of the most important things you can do to increase your guns accuracy and efficiency.
|
|
|
![iFit Barrel Adapter and Barrel[TPX]](https://paintball.tippmannparts.com/photos/products/2292-1.jpg "iFit Barrel Adapter and Barrel[TPX]")
|
|
|
|
|
|
|
|
|
|
|
|
Use your iFit barrel system on your TiPX.
|
|
|
