Free Economy Shipping on orders over $89

Save $30 now on any Tippmann 98, A5, or FT-12.

Reduced shipping cost available on smaller orders

Tippmann Parts
Questions? Call us!
Mon-Fri - 9-5 CST
Security Verified
(Your shopping cart is empty)
Knowledge Base:  

You are here: Knowledge Base : Grip
Page of 1

Upgrading and Installing an Electronic Grip [Tippmann 98 Series

]

This is the current 98 E-Grip offering from Tippmann. http://www.tippmannparts.com/Tippmann-E-Grip-Custom-Pro-p/688.htm It will work on any of the Tippmann Custom Pro's, Platinums, and any 98 Custom

Upgrading to an E Grip and an aftermarket Board [X7, X7 Phenom, A5 (2011)]


I have an X7, X7 Phenom, or an A5 (2011) with a manual trigger, and an electronics board. What other parts do i need to make a complete grip? Unfortunately there are a few parts needed that are no

E-Grip Trigger Board Problem [98, A5, Crossover, X7, Phenom, Alpha Black, Carver One, Project Salvo]


If you have a problem with an E-Grip Trigger, these steps may help to solve your issue: Before doing and trouble shooting of any kind, make sure your marker is degassed and follow your manual for di

Converting E-grips to Mechanical [98, A5, X7, Alpha Black, Carver One, Project Salvo]


You will need these parts when converting an E-Grip to a Mechanical Semi-Auto For 98 Customs (with Push Sear, and Platinum Series) and US Army (Alpha Black, Project Salvo, Carver One): 2493 - Complet

Rail Accessory Mounting (Sights) [Alpha Black, Bravo One]


To put a sight, scope, fore-grip or a tactical carry handle on an Alpha Black or Bravo One , you need to add weaver / picatinny accessory rails. You can add rails to the carry handle or barrel shro

Shooting / Air System / Leak Problem Troubleshooting [Crossover]


To troubleshoot a Tippmann Crossover air leak, first determine the location of the leak.   If the leak is from the Tank / ASA Regulator connection: This

Shooting / Air System / Leak Problem Troubleshooting [X7 Phenom]


To troubleshoot an X7 Phenom air leak, first determine the location of the leak. If the leak is from the Tank /  Tank Adapter ASA : This leak comes from a cut or nicked 18-PA Tank Valve Oring .
Built with Volusion