Free Economy Shipping on orders over $89

Reduced shipping cost available on smaller orders

Tippmann Parts
Questions? Call us!
Mon-Fri - 9-5 CST
Security Verified
(Your shopping cart is empty)
Knowledge Base:  

You are here: Knowledge Base : Upgrade
Page of 1

Upgrade your A5 RT Hoses from 1/16" to 1/8" [A5]


Easy to do.  You need this 1/8" hose Response Trigger fitting kit . http://www.tippmannparts.com/Tippmann-Adapter-Cyclone-Feed-Response-Kit-98-p/2759.htm and 1 extra hose for the A5. http://www.t

Upgrades vs Mods vs Accessories


On our site an most other, the terms Upgrade, Mod, and accessory are used interchangeably. For our articles here we're trying to be as exact and educational as possible. So we'll use these definition

Upgrading to an E Grip and an aftermarket Board [X7, X7 Phenom, A5 (2011)]


I have an X7, X7 Phenom, or an A5 (2011) with a manual trigger, and an electronics board. What other parts do i need to make a complete grip? Unfortunately there are a few parts needed that are no

Rail Accessory Mounting (Sights) [Alpha Black, Bravo One]


To put a sight, scope, fore-grip or a tactical carry handle on an Alpha Black or Bravo One , you need to add weaver / picatinny accessory rails. You can add rails to the carry handle or barrel shro

Are Tippmann Paintball Guns easy to maintain? [98, A5, Crossover, Gryphon, TiPX, X7, Phenom, Alpha Black, Carver One, Project Salvo]


Paintball guns are basically pneumatic tools.  Keeping them clean and lubricated are the most important things. Replacing the internals seals at least 1 time per year (2-3 times if you are a more

Effective Range for Paintball Guns (ER)


Range and Accuracy - What's the most accurate gun? The term I'm going use here is Effective Range.  Effective range would be the range that you can shoot and accomplish a goal.  One could a

Choosing the best paintball gun for you.


 This article is a work in progress and includes thoughts, notes, links to unwritten articles, and other random inconsistencies.  Read at your own risk. :) So what makes one gun better than

E-Grip Trigger Board Problem [98, A5, Crossover, X7, Phenom, Alpha Black, Carver One, Project Salvo]


If you have a problem with an E-Grip Trigger, these steps may help to solve your issue: Before doing and trouble shooting of any kind, make sure your marker is degassed and follow your manual for di

Cyclone Feed Troubleshooting [98, A5, X7, Phenom, Alpha Black, Project Salvo]


Cyclone troubles?  Try these helpful tips Always keep the cyclone clean.  Broken paint and shell will get on the Feeder Housing , Sprocket Paddles , Feeder Axle ,

Air Power: CO2 vs HPA


Every paintball gun needs some sort of air in order to fire a paintball and there are 2 ways you can go. Using CO2 is the simplest and cheapest way to go. CO2 is a liquid that expands to a gas, and i

Converting E-grips to Mechanical [98, A5, X7, Alpha Black, Carver One, Project Salvo]


You will need these parts when converting an E-Grip to a Mechanical Semi-Auto For 98 Customs (with Push Sear, and Platinum Series) and US Army (Alpha Black, Project Salvo, Carver One): 2493 - Complet

Feed elbow, cyclone feed, or front sight attachment problems [98, Alpha Black, Project Salvo]


On the 98 Custom series , Alpha Blacks , and Project Salvos , the feed elbow or cyclone feed housing attaches to the body with 2 pins on the bottom, and then locks into place by latching on the front

Response Trigger Troubleshooting [98, A5, X7, Alpha Black Elite, Project Salvo]


Response Trigger isn't getting a burst rate of fire To Tune the RT System Follow the air cylinder installation and velocity screw adjustment instructions in the Getting
Built with Volusion