Barrels for the U.S Army Guns [Alpha Black, Bravo One, Carver One, Tango One, Project Salvo, Sierra One]
The US Army line of guns, including the Alpha Black / Bravo One, Project Salvo / Sierra One, and the Carver One / Tango One use Tippmann 98 Thread Barrels.
To fit in the shrouds, the barrels must meet some requirements:
- US Army Alpha Black & Bravo One - 9 inch Minimum Length x 1 inch Maximum Diameter
- US Army Project Salvo & Sierra One - 9 inch Minimum Length x 1 inch Maximum Diameter
- US Army Carver One & Tango One - 4.5 inch Minimum Length x 1 inch Maximum Diameter
Most barrel diameters are less than 1 inch. To compensate for smaller barrels that fit inside the shroud, you may need to add a shim for a tight fit. This can easily be done with a few wraps of electrical tape (a paintball players best friend). Add where the front of the shroud is going to meet the barrel when it is fully installed.
Leave a comment